AlphaFlo supreme interchangeable ASH SRC&SRH series slurry pump replacement parts
AlphaFlo® chinese producer and supplier of high-quality ASH SRH & SRC series centrifugal slurry pump replacement spare parts.
The OEM Envirotech ASH SRH & SRC elastomer-lined horizontal centrifugal pumps with wet gland and dry gland configuration have been designed to significantly reduce the operating costs of pumping abrasive and corrosive slurries.
The SRH and SRC series slurry pump has been specifically developed to provide the lowest possible operating cost to the end user via incorporating the best features established from field proven designs ensuring ease of maintenance on site. By combining traditional strengths, ruggedness and dependability with advanced hydraulics, these pumps offer enhanced efficiency resulting in increased wearlife of components such as wearing liners and impellers. The advanced hydraulics utilises a unique patented volute design which reduces destructive turbulence thus further reducing the overall power consumption – the largest expense in total operating cos.
- ASH SRH/SRC Pump Feature
- Advanced hydraulics -Reduced turbulence – unique volute designLess recirculation and internal head loss.Superior suction characteristics,lower NPSH required.
- Thicker Liners -Absorb impact from large particles.
- Reinforced non-collapsible liners
- Effective and reliable ”dry gland” capability Unique two-stage expeller design.
- Unique bearing arrangement Utilises both radial and axial bearings.
- Casing pressure ratings to 3500 kPa Higher pressure ratings available.
- Fewer casing bolts and fasteners Full accessible eliminating hidden bolts.
- ASH SRC/SRH Pump Benifit
- Extended parts life - Less concentrated wear on liners and impellers. Lower impeller peripheral speeds. Less likely to cavitate.
- Longer wear life Greater resistance to cuts and crushing damage.
- Reduced erratic failures
- No gland seal water required - ”dry gland” No dilution or contamination of critical processes. Eliminates the need for costly seal water and reticulation.
- Maximum head capability More efficient, advanced hydraulics.
- High pressure applications
- ASH SRH pump “Wet Gland” Configurations
- ASH SRH pump models deliver maximum hydraulic efficiency in applications where minor process dilution is permissible from wet glands
- ASH SRC pump ”Dry Gland” Configurations
- ASH SRC pump models incorporate a unique two-stage dynamic expeller seal which eliminates seal water and reticulation while effectively sealing against suction heads of up to 12 metres. This sealing arrangement is completely protected by abrasion- and/or corrosion-resistant elastomer linings
Declaration : All OEM Weir Envirotech ASH pump & parts name,number and descriptions are for reference only. AlphaFlo's slurry pump parts interchangeable with OEM but not affilicated with OEM.
Pump Type & Models
| PUMP BRAND | PUMP SERIES | PUMP SIZE |
|---|---|---|
| ASH | 2.5X2 | SRH |
| ASH | 2.5X2 | SRC |
| ASH | 4X3 | SRH |
| ASH | 4X3 | SRC |
| ASH | 5X4 | SRH |
| ASH | 5X4 | SRC |
| ASH | 6X6 | SRH |
| ASH | 6X6 | SRC |
| ASH | 8X8 | SRH |
| ASH | 8X8 | SRC |
| ASH | 10X10 | SRH |
| ASH | 10X10 | SRC |
| ASH | 14X12 | SRH |
| ASH | 14X12 | SRC |
| ASH | 16X14 | SRH |
| ASH | 16X14 | SRC |
| ASH | 18X16 | SRH |
| ASH | 18X16 | SRC |
| ASH | 22X20 | SRH |
| ASH | 22X20 | SRC |
Slurry Pump Wear Parts
Rubber & Elastomers
AlphaFlo provides a wide range of natural rubber and synthetic elastomers for the majority of slurry pump wetted parts behave longer life and abrasion resistance in a variety of applications.
- Natural Rubber
- Neoprene
- Hypalon
- EPDM
- Nitrile
- Butyl
- Urethane
Reliable OEM aftermarket slurry pump parts from AlphaFlo®, please don't hesitate to inquiry us.